Post Falls Electrical Company handles electrical work for homes and businesses across Post Falls and the wider Kootenai County area. Whether you need a tripped breaker diagnosed, a panel upgraded to handle modern loads, or a dedicated circuit run for a new appliance, the work gets done cleanly and the job gets explained before anything starts. We treat your home and its wiring the way we would our own, and that shapes how every visit goes from the first call to the final check. Safe wiring. Solid workmanship. Straight answers.
Seeing flickering lights or a warm outlet? Those are common calls, handled alongside bigger jobs like full rewires, service upgrades, and EV charger installations. Residential or commercial, the approach is the same: figure out what is actually wrong, explain it plainly, and fix it right.
Most electrical calls start with a symptom. A breaker that keeps tripping. An outlet that stopped working. A light switch that buzzes when it dims. Troubleshooting and diagnostics are where the work begins, and getting that part right matters more than anything else on the job.
From there, the work covers the full range of everyday electrical needs. Outlet and switch replacement, GFCI and AFCI protection where code requires it, dedicated circuits for dryers, stoves, and kitchen loads that draw more than a standard circuit can carry. Surge protection and proper grounding and bonding round out the whole-home safety picture for residential customers.
Commercial clients have the same needs at a larger scale. Office electrical repairs, commercial panel upgrades, and wiring for retail and light industrial spaces all fall within what we handle across Post Falls and Kootenai County. Call and we'll handle the lights, outlets, and panel.
Older homes in Post Falls were often wired for 100-amp service, which made sense at the time. With electric vehicles, high-draw appliances, and home offices all pulling from the same panel, that capacity runs short fast. A panel that trips repeatedly under normal use, or one that simply cannot support a new load, is a practical signal that an upgrade is worth looking at.
We handle the full scope of panel work: breaker panel replacement, 100-amp to 200-amp service upgrades, subpanel installation, and load calculations to confirm what the existing service can carry before any new circuit is added. Meter and service-entrance upgrades are part of the same conversation when the utility connection itself needs attention.
Commercial panel upgrades follow the same process. The load calculation comes first, the scope gets confirmed, and the work proceeds from there. You get a plain answer on repair versus upgrade before anything is scheduled, so the decision is yours to make with full information. Reach out and we'll get it diagnosed.
If you're not sure your panel can handle the load, the wiring behind the walls may be part of the answer. Homes built before the 1970s in Kootenai County sometimes still carry knob-and-tube wiring or aluminum branch circuit wiring, both of which present real concerns when they age or when loads increase. Whole-house rewiring replaces the full circuit network. Partial rewiring targets specific runs or rooms where the existing wiring is no longer up to the job.
Aluminum wiring remediation is a more targeted fix: properly rated devices and connections at every termination point, which addresses the oxidation and heat issues that make aluminum wiring a concern in the first place.
Electrical safety inspections make sense for older homes, properties changing hands, and any building where the wiring history is unclear. The inspection covers the panel, the branch circuits, outlet and switch conditions, and grounding. Arc-fault and ground-fault breakers get noted where they are missing and required by current code. The fault gets traced before anything is replaced, so the inspection produces a clear picture of what actually needs attention rather than a list of precautionary replacements.
The electrical work that comes up most in this area reflects the climate and the way people live here. The sections below cover three services that come up regularly in Post Falls and across Kootenai County.
A Level 2 EV charger at home means a full charge overnight, regardless of what the temperature is doing outside. Post Falls winters make public charging stations an unreliable fallback, and a dedicated 240-volt circuit at the garage solves that problem cleanly. The job starts with a panel capacity check to confirm the existing service can carry the added load. If it can, the circuit gets run and the charger gets wired to the outlet or hardwired directly, depending on the unit. If the panel is already near capacity, a service upgrade gets scoped at the same time.
Kootenai County sees its share of winter storms, and a power outage that runs more than a few hours changes the calculation for a lot of households. A generator transfer switch installation connects a portable or standby generator to the home's panel in a way that keeps utility power and generator power safely separated. We handle the electrical connection and the transfer switch. The generator itself is the customer's equipment. What we wire is the circuit that lets it do its job safely when the grid goes down.
A surge protector at the panel catches voltage spikes before they reach the branch circuits and the appliances connected to them. Lightning activity in the region and fluctuations from the grid are both real sources of surge risk, and a whole-home suppressor addresses both at the point of entry. The installation goes at the main panel and takes a single visit. It does not replace point-of-use protection for sensitive electronics, but it handles the large events that a power strip suppressor cannot absorb.
When the job is done, we leave your home clean and powered, and that standard applies to the smaller jobs as much as the larger ones. Recessed lighting, LED retrofits, under-cabinet lighting, and outdoor and landscape wiring all follow the same process: the scope is agreed, the work is done, and the work area left as it was found.
Security lighting and motion sensor installations are a practical addition for homes and commercial properties alike. Ceiling fan installation and the wiring that supports it, GFCI outlet installation in kitchens and bathrooms, USB outlets, dimmer switches, and three-way switch replacements round out the day-to-day list. Commercial lighting installation, including office and retail spaces, follows the same approach. One call and we are on it.
Pricing questions come up early, and they should. Common ones include what an electrical panel replacement runs, what EV charger installation costs, what it takes to run a new circuit, and what a ceiling fan installation is likely to involve. The honest answer is that the price depends on what the job actually requires, and that gets confirmed on the call before anything is scheduled.
When you call us, you get a straight answer about the work. That means a clear explanation of what the job involves, what it will cost, and what the price covers. Nothing gets scheduled until the scope and the rate are agreed. If the job turns out to be different from what was described on the call, that gets discussed before the work continues, not after. Pick up the phone and we'll get rolling.
We know schedules shift, so we keep booking flexible, and we take calls seven days a week from 7:30 AM to 11:00 PM. Urgent electrical faults, including dead panels, failed circuits, and outlets that are hot to the touch, are handled within those hours. If the situation cannot wait, call and ask what the schedule allows.
The service area covers Post Falls and extends across Kootenai County to Coeur d'Alene, Hayden, Rathdrum, Spirit Lake, Dalton Gardens, and the communities along the Idaho-Washington border. Residential and commercial calls from across the county are handled the same way: scoped on the call, priced before scheduling, and carried out locally.
Not the biggest name in town. Just the one that answers. No runaround.
We work for homeowners, landlords, property managers, apartment owners, and commercial clients across Post Falls and Kootenai County. Whether it is a single repair for a homeowner or a list of units for a property manager, the process is the same: scope the job on the call, confirm the price, and get it scheduled.
Older homes in this area often have 100-amp panels, knob-and-tube wiring, or aluminum branch-circuit wiring, all of which come up regularly in our work. We know what to look for and how to address it, whether that means a full rewire, aluminum wiring remediation, or a panel upgrade sized to what the home actually draws.
Before any work starts, we explain what we found and what we plan to do. If something unexpected comes up during the job that changes the scope or the cost, we stop and explain it before continuing. You are not left guessing about what is happening or what it will cost.
Clear access to the panel, the work area, and any outlets or fixtures involved helps significantly. Knowing ahead of time whether the home has older wiring or a fuse box rather than a breaker panel also helps us come prepared. We go over those details on the call so the visit is as efficient as possible.
The same symptom can have more than one cause. A tripping breaker might be an overloaded circuit, a failing breaker, or a wiring fault downstream. We trace the fault before recommending a fix, so the repair addresses what is actually wrong rather than the most obvious possibility.
Older wiring, finished walls, and panels that have been modified over the years can all add time to a job. When we cannot confirm the full scope until we are on site, we explain what we find and what it means for the timeline before the work continues.
We schedule each job with enough time to do it properly. If a job runs longer than expected, we communicate that rather than rushing the work to fit the clock. For property managers with multiple units, we coordinate the schedule on the call so the day is planned realistically.
Post Falls Electrical Company is ready to take your call from 7:30 AM to 11:00 PM, every day of the week. Whether the job is a tripped breaker, a panel upgrade, or a new EV charger circuit, the process starts the same way: a call, a clear scope, and a price confirmed before anything is booked.
Plain answers. Clear options. Safe wiring.
Call (986) 946-5326 to get a quote for your electrical work.
(986) 946-5326